| PROBLEM | PROBABLE CAUSE | REMEDY |
| Noisy pump or motor | A) Clogged filter or pump inlets. | Clean filter, filter basket and pump inlets |
| B) Low water level. | Raise water level above filters. |
| C) Slice valves not open. | Remove service panels and open slice valves. |
| D) Debris in pump(s). | Call for service. |
| E) Damaged or worn motor bearings. | Call for service. |
| Pump not working | A) Fuse on circuit board blown. | Replace fuse. |
| B) Motor overloaded. | Let motor cool for one hour, open all jets. Motor will reset automatically. |
| C) Defective Pump button. | Call for service. |
| D) Blockage in line. | Call for service. |
| E) Broken pump or failed motor. | Call for service. |
| F) Slice valves not open. | Remove service panels and open slice valves. |
