To access the drain remove the 8 screws and two trim strips holding the front panel in place and remove the panel. The drain will be attached to a hose inside the cabinet.
Locate the drain, cut it free from the zip tie. Remove the cap and attach your garden hose placing the other end of the hose where you want it to drain. Open the drain as shown below. When finished draining, reverse the process and refill your hot tub as shown previously.
| Step 1 | Step 2 | Step 3 |
 |  |  |
| Pull and twist cap counter clockwise. | Attach the hose. | With the hose attached twist left or right 1/4” gently while pulling to extend fully drain insert to start the process of draining the spa. |